Home
     PRODUCTS
        Reload Kits         38mm         54mm         76mm         98mm         152mm         Supplies      Specials
     Links
     Tech Info
     Dealers
     Software
     About Us
     FAQ
     Documents


Loki Research graphite nozzles are sold standard with a smooth unpolished surface finish. All 76mm motor cases and bulkheads are plated with a Type III Hardcoat, Class 2 Blue protective finish.

IMPORTANT

Any 76mm motor ordered may have a different Commercial nozzle or Experimental (EX) nozzle size substituted for the difference in price for the sizes swapped. You need to state this change and provide a throat size in the Comment Box at checkout. EX throat size suggestions may be found on the TECH INFO Page.

Loki 76mm Cases 2021

ItemClass Case or Nozzle Length Est. Total Impulse CostQty.

76mm 13000ns Complete Experimental Motor.

N 57.0" 13000 Ns $760.00

76mm 8000ns Complete Motor. Comes with #56 nozzle.

M 40.875" 8000 Ns $630.00

76mm 6000ns Complete Motor. Comes with #52 nozzle.

M 30.875" 6000 Ns $525.00

76mm 4800ns Complete Experimental Motor. Comes with #40 nozzle

L/M 25.0" 4800 Ns $475.00

76mm 3600ns Complete Motor. Comes with #40 nozzle and smoke bulkhead.

L 19.625" 3600 Ns $430.00

76mm 2400ns Complete Experimental Motor. Comes with a #28 nozzle.

K 14.5 2400 Ns $390.00

76mm 13000ns Experimental Motor case and thrust ring only

N 57.0" 13000 Ns $550.00
76mm 8000 - case & external thrust ring only M 40.875" 8000 Ns $425.00
76mm 6000ns - case & external thrust ring only M 30.875" 6000 Ns $325.00

76mm 4800ns - Experimental case and external thrust ring only

L/M 25.0" 4800 Ns $285.00
76mm 3600ns - case & external thrust ring only L 19.625" 3600 Ns $240.00

76mm 2400ns - Experimental case and external thrust ring only

K 14.5" 2400 Ns $200.00

76mm #57 and larger Nozzle - Specify nozzle number in 64th`s of an inch, or throat size in the order comments.

2.75 $100.00

76mm #56 Standard Commercial Nozzle for use with 76/8000 hardware and reloads.

2.75" $90.00

76mm #53 to #55 Nozzle -Specify nozzle number in 64th`s of an inch, or throat size in the order comments.

2.75" $95.00

76mm #52 Standard Commercial Nozzle used with 76/6000 hardware and reloads.

2.75" $85.00

76mm #41 thru #51 Nozzle - Specify nozzle number or throat size (0.641"-.797") in the comments section when ordering.

1.75" (internal) $85.00

76mm #40 Standard Commercial Nozzle for use with 76/3600 Hardware and reloads

1.75" (internal) $75.00

76mm #29 thru #39 Nozzle - Specify nozzle number or throat size (0.641"-.797") in the comments section when ordering.

1.75" (internal) $85.00

76mm #28 Standard Commercial Nozzle for use with 76/2400 Hardware.

1.75" (internal) $75.00

76mm Smoke Bulkhead with 3/8-16 threads and smoke grain retaining ring.

1.125" (internal) $89.00

NEW 76mm Experimental Bulkhead.

1.125 $89.00
76mm Stainless Steel Nozzle Washer .101" $18.00

Low Profile 3/8"-16 Eyebolt - 304 Stainless Steel with flanged black Oxide lock nut included. Fits 76mm Bulkheads.

$20.00

76mm Low Profile External Thrust Ring (stainless steel)

$15.00
76mm Snap Ring $4.00





All portions of the LokiResearch.com web site are Copyrighted 2002 by Loki Research and should not be reproduced anywhere without permission.